Flow Monitoring Accessories
Street Level Monitoring
Street Level Installation Tool
Measuring flow and water quality in sewers is fast and easy. The Teledyne ISCO Street Level Installation Tool lets you install your monitoring system from ground level, eliminating the costs and hazards of manhole entry. Pole sections can be combined to access pipe as deep as 15 feet. Use the Street Level Installation Tool with the following ISCO flow and parameter sensors:
Area Velocity Sensors
Submerged Probes
Bubble Lines
pH Probes
Dissolved Oxygen Probes
Temperature Probes
Non-ISCO probes can be used as well, but may require adapting to fit the mounting rings.
The Street Level Installation Tool consists of a Mounting Ring and a Multi-section pole. To install, simply attach your sensor to the mounting ring, then slide the ring onto the rod at the base of the pole and lower it into the manhole. Pulling the strap collapses the ring so it can be inserted into the upstream pipe. Once in place, release the strap, allowing tension against the wall of the pipe to hold the ring in place. Remove the pole.
To remove, pull on the strap to collapse the mounting ring.
Mounting Rings
Available Sizes: 6, 8, 10, 12 and 15 inches (150, 200, 250, 300 and 380 mm)
Strap Length: 18 feet (5.5 m)
Weight (12" ring with strap): 6 lbs. (2.7 kg)
Materials: Type 301 stainless steel, Delrin®, stainless steel hardware, polypropylene strap
Compatible Teledyne Isco Sensors: Area velocity sensors, submerged probes, bubble lines, pH probes, dissolved oxygen probes, temperature probes
Multi-section pole
Maximum Length (assembled): 17.75 feet (5.4 m)
Maximum Manhole Depth (approximate): 15 feet (4.6 m)
Maximum Length (disassembled): 3 feet (0.9 m)
Maximum Weight: 6.5 lbs (2.9 kg)
Materials: Anodized aluminum, Type 304 stainless steel, Delrin
Data Retrieval
581 Rapid Transfer Device
The 581 Rapid Transfer Device (RTD) is the convenient alternative to using laptop computers in the field. Unlike laptop computers, the 581 RTD requires little or no training, so it can be easily used by anyone on your staff. Simply plug the 581 RTD into the port on your ISCO instrument and your flow, rainfall, water quality, and sampling data are quickly transferred to the RTD. There are no additional cables to carry, and no buttons to push. Data transfer is completely automatic.
Back in the comfort of your office, you can quickly transfer the data from the RTD to your PC for display, storage or printout. Teledyne ISCO offers Flowlink® software for analyzing the data collected by your RTD.
Standard Features
Large, versatile memory. With storage for over 900,000 bytes of data, a single RTD can typically retrieve data from up to 24 ISCO flowmeters and samplers.
Rugged and compact. The Teledyne ISCO RTD is unaffected by submersion, and small enough to fit in your shirt pocket.
Applications
Automatic data retrieval from ISCO 4100 Series Flow Loggers, 4200 Series Flowmeters, 6700 Series Samplers.
Options and Accessories
Flowlink Software. Downloads data from the 581 RTD and all compatible instruments, and generates informative graphs, reports, and summaries from stored data.
581 Rapid Transfer Device
Size (LxWxD): 5.2 x 3.0 x 1.9 in (13.2 x 7.6 x 4.9 cm)
Weight: 0.44 lbs (0.2 kg)
Material: Polyurethane
Enclosure: NEMA 4X, 6P IP68 (self-certified)
Power: 12V DC, 40 mA average current draw (provided by Teledyne Isco instrument or RTD Power/Data Transfer Cable)
Operating Temperature: 32° to 120°F (0° to 49°C)
Storage Temperature: 0° to 140°F (-18° to 60°C)
Program Memory: Non-volatile, programmable flash; can be updated using a PC and the RTD Power/Data Transfer Cable
Data Storage and Communication
Capacity: Approximately 965,000 bytes (482,500 readings); equal to 24 Teledyne ISCO flowmeters or samplers, each with 120 days of level and rainfall readings at 15 minute intervals, plus 1000 sample events
Cells: Maximum of 255
Compatible instruments: Teledyne ISCO 4100 Series Flow Loggers, 4200 Series Flowmeters, 6700 Series Samplers, 675 Logging Rain Gauge
Data Retrieval: Serial connection via RTD Power/Data Transfer Cable to a computer with Teledyne ISCO Flowlink Software
Baud Rate: 9600