The TracXP TXP-T40 transmitter is a highly configurable fixed gas detector supporting single or dual sensor applications in Class 1 Division 1 or Class 1 Division 2 environments. Local and remote sensor options allow the TXP-T40 to adapt to a wide variety of industrial applications.

The new TracXP TXP-SDA Sample Draw Accessory is designed to pull a gas sample from limited access or hostile environment applications where typically fixed gas detectors can not be installed. The TXP-SDA, coupled with our TXP-T40 transmitter, is ideally suited for applications such as tank headspace, ducts, vessels, wet wells, sumps, confined spaces, storage bins, cabinets, and other challenging applications where sensors can not typically be directly installed.

APPLICATIONS:

Chemical Plants, Contractor / General Construction, Food & Beverage Facilities, Heavy Metal & Steel, Municipalities, Oil & Gas, Oil Drilling, Pipeline Compression, Pulp & Paper, Refining & Chemical Production, Water Treatment Facilities

The TracXP TXP-C16X is a multi-channel control panel that provides signal conditioning, simultaneous real-time display, and alarm events for up to 16 input channels. The controller modules are designed in 8-channel options allowing the TXP-C16X to be set up as an 8 to 16-channel device to meet a wide variety of applications.

Two-Channel Controller provides simultaneous display and alarm functions for two monitored variables

Four-Channel Controller is designed to display and control alarm events switching for up to four inputs.

The TracXP TXP-C64 controller provides alarm and display functions for up to 64 inputs simultaneously. Economical configuration and/or expansion of the system is accomplished with 16, 32, 48, or 64 channel display modes and 16 channel I/O modules allowing the TXP-C64 to accommodate changing applications within your facility.

TracXP by FGD Flame detection options:

TXP-FDE IR3

TXP-FDE IR3-HD

TXP-FDE UV/IR

TXP-FDE UV/IR-HD

The TXP-WTA can be configured in single or dual sensor configurations to allow redundant readings for critical operations or monitoring combination gases. The TXP-WTA’s smart sensors allow changing sensor types quite easily. (Aluminum and Poly Black Enclosures Available)

The TracXP-ANA (Alarm Notification Assembly) is a flexible, cost-effective alarm status annunciation for general purpose applications. The TXP-ANA offers optional strobe light configurations of one to four strobes, standard 99 dB or optional 120 dB horn, optional configurable Hush/Silence, and optional wireless functionality with the TXP Wireless System.

The TracXP TXP-C16X is a multi-channel control panel that provides signal conditioning, simultaneous real-time display, and alarm events for up to 16 input channels. The controller modules are designed in 8-channel options allowing the TXP-C16X to be set up as an 8 to 16-channel device to meet a wide variety of applications.

The TracXP TXP-C64 controller provides alarm and display functions for up to 64 inputs simultaneously. Economical configuration and/or expansion of the system is accomplished with 16, 32, 48, or 64 channel display modes and 16 channel I/O modules allowing the TXP-C64 to accommodate changing applications within your facility.

TracXP TXP-WABX (Wireless Alarm Bar)

The TXP-WABX Wireless Alarm Bar is a notification device suitable for Class 1, Division 2 applications. The TXP-WABX communicates directly with TXP-WTA transmitters as well as TXP-WCR and TXP-C16X control panels via 900 MHz radio signal. The onboard horn provides a nominal output of 112 dBA with customizable volume control and has 64 different tones available.

The TracXP TXP-WCR (Wireless Controller Receiver) is available with 2.4GHz or 900MHz frequency to meet your communication requirements. Each TXP-WTA may be equipped with single or dual gas sensors and transmit two of the 32 maximum channel values to the controller and/or wireless alarm relay.